Edge Port Sling Pneumatic Marine Fender Inflatable For Ship Protection

Sling Pneumatic Fender Edge Port Marine Fender Inflatable For Ship Protection

Floating pneumatic fenders are used worldwide in Ship-to-Ship (STS) transfer operations, docks and various vessels. Used in ship-to-ship and ship-to-dock operations, fenders play a vital role in the safe operation of ship berthing and mooring.
1. ISO 17357-1:2014 certified
2. Guaranteed energy absorption
3. Low hull pressures
4 Chain tyre net and Sling type
5. Thick skin construction
6. Good angular performance

Henger Pneumatic Rubber Fenders are constructed of several layers of strong tire-cord, and are thus resistant to pressure and cutting. The safety factor adopted in the design of this fender is based on accepted theory and has been proven by extensive experimentation. Operational experience over a long period of time attests to its high safety and reliability, and hydraulic pressure tests have proven the strength to be suitable. Furthermore, large-size fenders are equipped with a safety valve to release the inside air in the event of accidental over-pressure. The figure below shows data obtained from many destructive pressure tests at various percentage compressions. Such data are used to establish a basic minimum endurable pressure (MEP) curve for pneumatic rubber fenders.

Ships usually make initial contact with the dock or another ship on STS operations at an oblique angle. In the case of solid rubber fenders or foam fenders, rated reaction force and energy absorption decreases considerably at inclined compressions compared with parallel compression. In order to compensate for the decrease of energy absorption at inclined compression, it is necessary to use larger sizes in the case of solid rubber fenders or foam fenders.

Distribution of load is also comparatively even because of the molecular freedom of air and high flexibility of the multi-layered cord-reinforced rubber membrane. This makes the body of a pneumatic rubber fender more shape conformant compared to solid or foam fenders, and thus able to better distribute the load along the hull of a ship or jetty structure during inclined compression.

Henger Pneumatic Rubber Fenders basically float on the water in an unrestricted vertical plane corresponding to the tidal range and ship's vertical movement.
This means that energy absorption always takes place at the most suitable position, and that only one fender is required per dolphin.

Details of Henger Pneumatic Rubber Fenders


Pneumatic Rubber Fender Technical Parameter

Model Selection of Pneumatic Fender for Small & Middle Size Ship

Model Selection of Pneumatic Fender for Large-tonnage Ship

Production Process

Sling Pneumatic Marine Fender

Edge Port Pneumatic Marine Fender

Ship Protection Marine Rubber Fender

Edge Port Sling Pneumatic Marine Fender Inflatable For Ship Protection Images